How to quickly paint the switching power supply transformer?

How to quickly paint the switching power supply transformer? Generally speaking, in actual work, manual peeling, electric peeling and peeler peeling are usually used to remove paint. So which of these three methods is more effective? This article analyzes the efficiency of these three methods for your reference.

1. Peel with a knife. The number is small, and the wire diameter can be thick. However, if the quantity is large and the wire diameter is small, please consider carefully, and the quality will be lost due to missed work and easy to break.

2. Electric peeling. The drill bit needs to be the right type (to match the wire). This method is fast and time-saving.

3, peeling agent peeling: Adjust the peeling agent in the plane slot to a good height, and then place the transformer one by one from the slot head. After the transformer was completely emptied, the original glass had been cleaned and the transformer was pushed to the stairs. The release agent remaining on the empty drip line can be applied with a cloth. Do not let the stripper creep onto the transformer. As for the dripping method of the paint remover, I think that as long as the position of the paint remover is controlled, the dripping can be operated. Of course, there is a risk of dripping from the internal short circuit, but the location of the soaking dripping can be shallower.

The above is an introduction about how to quickly remove the paint from the transformer power supply wire of the switching power supply transformer. I hope it can help you.

Wuxi Derun Electronics Co., Ltd. has been engaged in transformer production for 17 years. It is a high-tech enterprise in the transformer industry. Its products include high-frequency (switching power transformer), low-frequency iron-core transformers, and various types of inductors. The company has a strong R & D and perfect after-sales team. 

Switching Power Transformer Website: http://wxderun.com